Edit: question has already been answered in February 2012 here: http://www.leeduser.com/credit/CI-2009/EAp2 Didn't find it before, sorry for any confusion. Dear all, on several spots in the Ref Gu

For baseline HVAC system #8 modeled with purchased chilled water according to Option 1 of Treatment of District or Campus Thermal Energy in LEED v2 and LEED 2009 guideline, does the Chilled-Water S

We have a mixed use facility that is 34% hotel, 34% office, and 32% parking garage.

Dear all, our previous version of the baseline model in a C&S building had the same ventilation rates than the proposed.

Mandatory provision 6.4.3.2 Setpoint Overlap Restriction When heating and cooling to a zone is controlled by separate thermostatic controls shall heating setpoint exceed cooling setpoint. In our C&

In our project location, it is clear that no tenants will go for a heating system. The base building is also designed for cooling only.

We are working on an open-air shopping mall with 6 buildings arranged around a main "street". Some are attached and some aren't.

Hello All In this LEED_CS project, the existing masonry wall was changed to the following configuration (from outside to inside): - glass-fiber-reinforced concrete panels [TAKTL] on galvanized st

Hi! We have some canopies in our project, but one of these canopies is 5w over-lighted. It's our understanding that we can make it up by under-lighting other tradable surface.

Dear sir/madam, For the area of mechanical ventilation, the actual design has no heating but ventilation.