Hi! We have a data sheet from a shower which specifies a flow of 7,8 liters/minute at a pressure of 5.5 kgf/cm2 (which is equivalent to 5,39 Bar or 78 PSI).

The project I am working on is an office building located in middle east. the Washroom water closets all has water jets or a bun gun fixture for washing purpose instead of using toilet paper.

Greetings, I am currently researching the LEED methodology for calculating a water use/efficiency baseline for the housing sector. Any links or advice would be greatly appreciated. Regards.

Hi, Currently we are working in a office project. For the aesthetic purposes the project owners has selected flow fittings which does not meet the LEED requirement.

We are working on a LEED campus project which is going to be certified with one new construction building (will be certified LEED NC 2009) and some other buildings which are not going to be certifi

Hello. In our LEED Project, the water used for Urinals and WC is recovered of the subsoil (freatics water).

Would a Eye Wash Basin in a Laboratory be considered as Process Water and should not be included in the credit calculation?

Hello, I was just wondering if anyone knows the reference or basis of the numbers used in Table 2. Default Fixture Uses, by Occupancy Type in the LEED manual?

We have a campus project where one of the buildings contains showers and changing rooms for the entire campus. In spite of our explanations of the function of these showers, the LEED Reviewer stat