Forum quick links
Hot Melt Adhesives
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Bruce Maine on
I thought I knew the answer to this question but can't confirm. Are Hot Melt adhesives used in the application of laminates covered by the 80 g/L threshold? Thanks!
EMICODE as compliance to this credit? and other IEQc4?
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Agnes Vorbrodt on
Many manufacturers state that a product is low emitting, and as a proof send Emicode certification/results.
Sealant VOCs
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Erin Holdenried on
For a product that "does not contain isocyanates, silicone, solvent or acids" does this mean there are 0 VOCs? Or are there other compounds that could be present that contain VOCs?
metal roof sealant
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by cathy keagle on
Which category does Novaflex metal roof sealant fall into? Thanks
n/a
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by MARIA ESTHER LAMADRID on
How should i classify an elastomeric butyl rubber sealant- sealant tape used in the metal roof
European Certificates accepted?
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Nicole Isk on
Adhesives and sealants must meet the VOC limits defined by the SCAQMD Rule 1168 respectively the Green Seal Standard for Commercial Adhesives GS 36.
VOC for fire proofing / intumescent sealants
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Stacey Olson on
Would fire proofing / intumescent sealants be considered "Other" or "Architectural Sealants"? I did not find it itemized in SCAQMD 1168. Thank you!
Category for IEQ Credit 4.1
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by S D on
I am new to the LEED process. I am having trouble determining which categories the following products fall under for the purpose of IEQ Credit 4.1.
Grout additive?
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Erin Holdenried on
What category would a grout additive fall under? Thanks!
IEQ 4.1 CAmpus Credit
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by ethen mcmanus on
My project is composed of 10 buildings on a college campus. I know for a fact that IEQ 4.1 credit is a campus credit. My question is: How do I verify this?