Forum quick links
Floor joists part of interior?
NC-2009 IEQc4.4:Low-emitting materials - composite wood and agrifiber productsposted by John Covello on
Hello, Are floor joists considered part of the building interior? So artificial wood used in the joists cannot have urea formaldehyde?
Platinum Certification
EBOM-2009 EAp2:Minimum energy efficiency performanceposted by Muzammal Abbas LEED AP (BD+C) on
We had submitted one of our LEED EBOM project final review and received 72 points. We had accepted the review and received Certified Gold Level.
Green pavers
CS-2009 SSc5.2:Site development - maximize open spaceposted by jesmin joseph on
Can green/grass pavers comply towards maximum open space credit? Can we consider 25% percentage of grass paver area as vegetated area and other 75% as pedestrian oriented hardscape area? Please a
EA Cr 1.5
Retail-CI-v2009 EAc1.5:Optimize energy performance - building envelopeposted by balasubramaniam kg on
We have a retail commercial project in a leed certified building that is an air port. we want to know for the UA calculation only requires to use the project areas or all the building areas.
link goes to the main USGBC home page
Pilot-Credits PC14:Walkable Streetsposted by Melissa Merryweather on
Hi, I am registered for this Pilot Credit.
Permanent Land /Space Requirement (MPRPp2)
NC-2009 MPR2:Must be a complete, permanent building or spaceposted by al-emran hossain on
Hi LEED Expert , We want to know about Minimum Program Requirement (MPRPp2)of permanent space/land matter. Our client has 20 years lease land from BD Gov and build NC factory as a LEED Project .
Water Efficiency Calculation
NC-2009 WEc2:Innovative wastewater technologiesposted by ABDUL MUTHALIB MOHAMED on
Hi, My project is a factory building. They are installing only Indian Water Closets and no Urinals. How to calculate water efficiency if Urinals are not used?
Energy Modeling for Support buildings
NC-2009 EAp2:Minimum energy performanceposted by SAMY Chamy on
Dear All:- Recently we submit the factory building to LEED as Individual project certification not for group certification.
Prescriptive compliance
CI-v4 EAc2:Optimize energy performanceposted by Michael Wahjudi on
Can a project eligible for points under Base Building Systems - Building Envelope, Opaque and Building Envelope, Glazing if they can meet most of recommendations from 50% AEDG?
Epoxy mortar for anchoring rebar in concrete
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Anna Okviana on
Hai, my project use epoxy glue for anchoring rebar from brick wall to column and slab in indoor area. Does it must meet LEED requirement for adhesive and sealant?