I have a project where I received a submittal for a subflooring hard surface material.

Our project is currently registered under NC 2009. This 66,500sf project consists of a new classroom addition to an existing 53,000sf building, which achieved LEED silver under NC 2.2.

I am working on a job with the Army Corps of Engineers that has a vehicle maintenance workbay with general exhaust requirements of 1.5 CFM/SF dictated by the RFP.

I use Carrier-HAP and according to ASHRAE 90.1 G.1 #4, all baseline HVAC fans should be running continuously when the space is occupied and cycled when the space is unoccupied.

G3.1.1, Exception "d" requires laboratory spaces with a minimum of 5000 cfm of exhaust to use a baseline system type 5 or 7 that reduce the exhaust and makeup air volume to 50% of design values dur

We are working on a project where there is not enough room for on-site separation, and the commingled waste will be picked up by the sorting facility.

Have your clients begun asking for this to become their new standard? I haven't seen this yet but we are starting to use them more and more. frequently.

For V4, is there no requirement anymore to upload supporting documents? I don't see any upload buttons on the form itself.

Are clay roof tiles (made in US) acceptable under MRc6? What about lime based plaster (made in US)? Thanks!

We have a project that will meet SS2 once pedestrian access is available. Do you know if it is adequate to show the sidewalk is in the county's budget?