Forum quick links
Energy Model for Unconditioned Warehouse
NC-v4 EAp2:Minimum energy performanceposted by Przemysław Rejczak on
Dear Everyone,
We have a warehouse project located in Spain. It won`t be equipped with heating, nor cooling system. I am not sure how to approach this.
Wood donation tracking
NC-v4 MRp2:Construction and demolition waste management planningposted by Jacinta Lang on
Hi All,
Apartments in university dormitory
NC-v4 EAp2:Minimum energy performanceposted by Cory Duggin on
Is it correct that an apartment in a dormitory should be documented as a residential dwelling unit in the MEPC on the multifamily tab but the dorm rooms should not as they are not complete dwelling
CxA Experience
NC-v4 EAc1:Enhanced commissioningposted by Shuguang Huang on
Can someone with commissioning experience for LEED CI projects and LEED O+M Existing Buildings be qualifed to be commissioning agent for a new construction?
Outdoor ventilation rates in baseline and proposed
CS-v4 EAp2:Minimum energy performanceposted by Sarah Leenknegt on
Hi
Overlapping Irrigation Zones
NC-v4 WEc1:Outdoor water use reductionposted by Jennifer Wehling on
Our irrigation consultant has provided an irrigation calculation where the total irrigation area (approx. 5000 SF) is more than the total landscape SF (approx. 3000 SF).
Is EPD obligatory for all curtain wall assembly or just an EPD for glazing count for LEED?
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Sara BENAYYAD on
Hello Everyone,
RE: EPD's For Assemblies or Whole Products (Mortars and Grouts)
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by John Doherty on
I am reviewing the benefit of generating EPDs for our pre-blended mortar and grout products and the challenge is the guidance via the new rules of LEED v4.
EPD's for Assemblies
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Katelyn Adley on
Hello,
DCV in baseline system
NC-v4 EAp2:Minimum energy performanceposted by Francesco Passerini on
If Demand Control Ventilation is required in the baseline system, shall the air flow rate be increased when it's useful in order to reduce the cooling demand or shall the control of the outdoor air