We have an industrial hall where a single thermal zone is heated by two separate systems:

We are working on a CI project where the existing glazing performance is unknown.  Is there a conservative, default value the GBCI will accept for use in the daylight simulations?

I found the information relatively easy to find with the documentation provided by the product manufacturers.

Hi,

A proposed case with spot cooling in kitchen/food prep area is mechanically ventilated aswell. The spot cooling is served by PAHU units connected to ODU. 

Hi

On a LEED BD+C: Healthcare project, some perimeter rooms are deeper than 15 ft, and the space continues as a single, undivided room (for example, 30 ft deep).

Hi all,

I've got a question regarding the baseline HVAC system for a datacenter project. Modeling in DesignBuilder and using ASHRAE 90.1 2010.

Hi all,

I've got a question about calculating the pressure drop adjustments for a baseline building. I'm using LEED v4, ASHRAE 90.1 2010.

Hi, All - We just completed our documentation of the pilot credit, and it was incredibly straightforward for our project.

We are currently working on a project in which, during the outdoor airflow measurements, we identified that the ventilation fans were delivering significantly lower outdoor airflow rates than requi

It is not clear what the action plan must have in order to comply with the requirements of the credit.