Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

absence of material in a category

NC-v4 EQc2:Low-emitting materials
posted by  Jens Apel  on 

What if there is no material in a certain category, e.g. composite wood?

1
Tue Jun 19, 2018, 2:23 pm

Preferred Parking Requirement

CI-v4 LTc5:Reduced parking footprint
posted by  Patty Lloyd  on 

For our project, 60% below baseline for our building type would be 30.33 parking spots.

1
Tue Jun 19, 2018, 3:58 pm

APPA custodial audit

EBOM-2009 IEQc3.2: Green cleaning - custodial effectiveness assessment
posted by  Minh Le  on 

How to calculate the average score for space type ?

3
Mon Jun 18, 2018, 11:12 pm
3
Mechanical & Energy Engineer
Bureau Veritas Morocco
LEEDuser Basic Member
3 thumbs up
Mon Jun 18, 2018, 6:31 pm

Ventilation calculation square footage boundary

NC-2009 IEQp1:Minimum indoor air quality performance
posted by  Melissa Mikulka  on 

We have a project that contains a recycle bin storage area within a corridor.  Do the exhaust calculations have to include the entire corridor space or can we designate an area around the

2
Mon Jun 18, 2018, 2:15 pm
4
Project Director
WSP USA
LEEDuser Basic Member
381 thumbs up
Mon Jun 18, 2018, 11:24 am

Pre Fab Building Compliance

NC-v4 EQc2:Low-emitting materials
posted by  Kristen Magnuson  on 

Is it still possible to get 3 points for 5 compliant credit categories, if the building is entirely constructed off-site and then brought to the site and assembled?

0

LEED AP + Independent CxA

NC-v4 EAc1:Enhanced commissioning
posted by  Mike D  on 

If a team is appointed as LEED AP on a project, can they also act as the independent commissioning agent (the team has not design or construction contract)?

8
Fri Jun 15, 2018, 4:56 pm

Baseline: existing heat pumps, new FCs

NC-v4 EAp2:Minimum energy performance
posted by  Francesco Passerini  on 

I'm modeling a commercial building that has 7 conditioned floors and is heated and cooled by 3 electric heat pumps. According to TABLE G3.1.1A the baseline model should be a System 8.

5
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4461 thumbs up
Fri Jun 15, 2018, 4:12 pm

Outdoor air

NC-v4 EAp2:Minimum energy performance
posted by  Emmanuel Pauwels  on 

In exception C in section G3.1.2.6 Ventilation, it states that 'If the minimum outdoor air intake flow in the proposed design is provided in excess of the amount required by the rating authority or

5
Fri Jun 15, 2018, 3:52 pm